Graphitegraphite

How to Draw a Bowl in Pencil (From Slightly Above)

Draw a realistic bowl seen from slightly above: an oval rim, a rounded body, shading inside and out in opposite directions, and a cast shadow.

By Ayoub Farid · · 2 min read

A bowl teaches you that light behaves differently inside and outside a curved object. Graphite's daily sketch: draw a bowl from slightly above, with an oval rim and a rounded body. Shade the inside and the right side, and add its shadow.

Daily sketch reference: a bowl from slightly above
Daily sketch reference: the inside is shadowed on the light side

Step 1: The rim

Draw a wide ellipse for the rim. Seen from slightly above, it's fairly open.

Step 2: The body

From the ends of the ellipse, draw a rounded "U" curve for the body, below the rim. A bowl's bottom is rounder and deeper than a mug's.

Step 3: Rim thickness

Draw a second, slightly smaller ellipse inside the first to show the thickness of the rim.

Step 4: Shade the inside

Inside the bowl, the shadow falls on the side nearest the light (left, with light from the top left), because that inner wall faces away from the light. The far inner wall is lit.

Step 5: Shade the outside

The outside is darkest on the lower right, with a core shadow band just inside the edge, and reflected light near the bottom.

Step 6: Cast shadow

To the lower right, darkest under the base.

Inside vs outside

Light side (left)Shadow side (right)
OutsideLitDark
InsideDarkLit

A 15-minute practice plan

  1. 3 min: rim ellipse and inner ellipse for thickness.
  2. 3 min: body curve; check it's symmetrical around a center line.
  3. 5 min: shade the inside (dark on the light side).
  4. 3 min: shade the outside (dark on the shadow side).
  5. 1 min: cast shadow.

Values at a glance

AreaValue
Rim top edgeLightest
Inside wall, far sideLight
Inside wall, near the lightDark
Outside, light sideLight
Outside, core shadowDark
Contact shadowDarkest

Variations

  • A bowl with fruit: the fruit casts shadows inside the bowl, combining this lesson with cherries or an orange.
  • A bowl from the side (eye level): the rim ellipse becomes very flat.
  • A glossy ceramic bowl: add a sharp highlight on the outside and a reflection on the inside.

Frequently asked questions

Why is the inside shadow on the opposite side?

Because the inner wall on the light side faces away from the light, like the inside of a mug.

How round should the rim ellipse be?

The higher you look from, the rounder it is. Seen from directly above, it's a circle.

My bowl looks flat. Why?

The inside and outside shading go the same direction. Reverse the inside.

Keep reading